The Adaptive Gaming Kit from Logitech G is an amazing value for those who use Assistive Technology. However, the one thing on our wish list is 1/4″-20 mounts on the bottom so we can use normal camera mounts.
So, in keeping with our other mounts, we’ve released a full set of 3D printable mounts to connect these great switches to inexpensive mounting options.
Check them out here on Thingiverse
There are 6 designs.
- One for the Large Switch that takes a 1/4″-20 Barbed T-Nut OR a Heat-Press Insert
- One for the Trigger that takes a 1/4″-20 Barbed T-Nut OR a Heat-Press Insert
- One for the Medium Switch that takes a 1/4″-20 Barbed T-Nut OR a Heat-Press Insert
- One for the Medium Switch that ONLY takes a Heat-Press Insert (but is smaller/stronger)
- One for the Micro Switch that takes a 1/4″-20 Barbed T-Nut OR a Heat-Press Insert
- One for the Micro Switch that ONLY takes a Heat-Press Insert (but is smaller/stronger)
If you have a Heat-Press Stand,I recommend the heat-press inserts for the Medium and Micro Switches. The T-Nuts BARELY fit in them and the plastic gets pretty thin around them.
Feedback is welcome & these may get an update (I think some of the text is upside down), but these are working.
You must be logged in to post a comment.